XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
4. Remove the evaporative loss flange from the tank
-
Remove the locking ring from the evaporative loss flange using tool 412-070.
-
Reposition the flange from the tank.
5. Remove the evaporative loss flange from the tank.
-
Disconnect the fuel pump electrical link lead.
-
Remove the flange and the flange to tank seal.
-
Discard the seal.
Installation
1. Installation is the reverse of the removal procedure.
-
Refer to the Battery Reconnection Procedure. See: Starting and Charging/Battery/Service and Repair
-
Install a new sealing ring to the evaporative loss flange.
-
Install the fuel level sender unit.