XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1050002.png)
6. Remove the intake tube/air flow meter/air cleaner cover assembly.
Remove the intake tube/air flow meter/air cleaner cover assembly.
Remove and discard the rubber seal; air intake tube to throttle body.
Installation
1. Install the intake tube/air flow meter/air cleaner cover assembly.
Position the intake tube/air flow meter/air cleaner cover assembly.
Install a new rubber seal and position the air intake tube to the throttle body.
2. Connect the intake tube to the throttle body.
Install a new seal and connect the intake tube to the throttle body.
Install the two bolts which secure the intake tube to the throttle body. Tighten to 4-5 Nm.
