XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
Remove transducer.
Remove upper and lower screws.
Remove transducer.
Remove and discard 0-ring seals.
Retrieve and discard filter.
Place transducer in a clean plastic bag until required for assembly.
10. NOTE: Note orientation of pinion valve housing for assembly reference.
Remove pinion valve housing.
Remove and discard screws.
Carefully lift the pinion valve housing from the steering rack using a steady upward twisting motion.
Excessive force and rocking of the housing should be avoided, to prevent damaging the rotary valve O-ring seals.
Remove and discard the O-ring seal from between the pinion housing and steering rack main body.
11. Cover rotary valve assembly with a clean plastic bag.
12. Clean and inspect all relevant components and mating faces.
Installation