XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
10. Remove nut from lower-wishbone ball joint.
11. Release lower ball joint from vertical link.
1. Fit special tool to ball joint.
2. Tighten tool bolt to release ball joint taper-pin.
3. Remove tool and disengage ball joint from vertical link.
12. Remove the vertical link and hub assembly from the vehicle.
13. Clean relevant parts.
Installation
1. Position modified vertical link and hub assembly to vehicle.
2. Fit upper ball joint to vertical link.
1. Position ball joint taper-pin in vertical link.
2. Fit and tighten nut.