XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
13. Carefully chisel through and remove the two ball joint flange segments to permit installation between press bed plates.
14. Remove wishbone from vise and thoroughly clean to remove swarf and road deposits.
15. For warranty purposes, paint positions of spring clip ends on ball joint housing and rubber gaiter.
16. NOTE: Any gaiter damage incurred during removal must be recorded for warranty purposes.
Remove retaining clips and gaiter.
Exercising care to avoid splitting or otherwise damaging gaiter, remove retaining clips.
Remove gaiter and retain for warranty purposes.