XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1740004.png)
2. Fit bolts securing link assemblies to suspension subframe.
Make sure spacer is in position.
Fit bolt, DO NOT tighten at this stage.
Repeat procedure to fit bolt to opposite-side of subframe.
3. Fit bolts shown, to suspension subframe.
Fit bolts, DO NOT tighten at this stage.
Fit nuts and bolts, DO NOT tighten at this stage.
Fit nuts and bolts, DO NOT tighten at this stage.
4. Tighten subframe bolts shown.
