XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1793003.png)
Action(s) to take:
^
Correct pressure to specification
Wheel mounting is difficult.
Possible Source(s):
^
Incorrect application or mismatched parts, including wheel studs and wheel nuts.
^
Corroded, worn or damaged parts.
Action(s) to take:
^
Follow the manufacturer's specifications. Clean or Renew.
Wobble or shimmy affecting wheel runout.
Possible Source(s):
^
Damaged wheel (eventually damaging wheel bearings and causing uneven tire wear).
Action(s) to take:
^
Inspect wheel rims for damage and runout. Renew as required.
Vehicle vibrations from wheels and tires.
Possible Source(s):
^
Tires/wheels mismatched.
Action(s) to take:
^
Install correct tire / wheel combination.
Possible Source(s):
^
Inflation pressure too high or low.
Action(s) to take:
^
Correct pressure to specification
Possible Source(s):
^
Uneven tire wear.
Action(s) to take:
^
Refer to Diagnosis and Testing.
Possible Source(s):
^
Wheel and tire assembly imbalance.
Action(s) to take:
^
Balance wheel and tire assembly.
Possible Source(s):
^
Brake disc imbalance.
Action(s) to take:
^
Check brake disc cooling fins for mud and foreign material.
^
Check for damage or disc heavy spot.
Possible Source(s):
^
Damaged or distorted wheel.
Action(s) to take:
^
Renew wheel.
Possible Source(s):
^
Excessive radial run-out of wheel or tire.
^
Excessive lateral run-out of wheel or tire.
Action(s) to take:
^
Renew wheel or tire.
