XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
/v8-4.0l_(aj26)/Page-1799021.png)
3. Apply a thin film of Shell Retinax "A" grease to hub shaft and install hub in carrier/bearing assembly.
4. Install inner bearing assembly and seal.
Install bearing spacer.
Install bearing shim.
Install inner bearing.
Install and fully seat new inner bearing seal using special tool 205-234.
5. Place block of wood on hydraulic press-bed and position hub carrier on block.
6. CAUTION: Do not allow press load to be directed onto hub studs.
