jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

ABOUT US
Output Shaft, A/T|Service and Repair|Page 5427 > < Output Shaft, A/T|Service and Repair|Page 5425

XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)

Page 3
background image

3. Refit the drive flange.

Use a new nut. Tighten the flange nut to the specified torque figure. 
Stake the nut to the output shaft.

4. Refit the bolts securing the driveshaft and tighten to the specified torque figure.

5. Refit the the rear mounting crossmember and tighten the securing bolts to the specified torque figures.
6. Refer to fluid fill procedure. See: Fluid - A/T
7. Check for leaks and remove spilt fluid.

Output Shaft, A/T|Service and Repair|Page 5427 > < Output Shaft, A/T|Service and Repair|Page 5425