XK-8 Coupe (X100) V8-4.0L (AJ26) (1998)
3. Fit the bearing using special tool 204 - 083.
Position a new circlip.
Locate the bearing.
Locate the collar.
NOTE: It is strongly recommended that a press equipped with a pressure gauge is used, the assembly load MUST exceed 20 Kn.
Press the assembly.
4. Fit the output shaft assembly to the final drive.
Lubricate the 'O' ring & seat the shaft assembly.
Secure the assembly with the circlip.
5. Ensure the correct circlip location.