XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1226003.png)
7. Withdraw amplifier/mounting bracket assembly from trunk and remove bolts securing amplifier to bracket.
Installation
1. Position amplifier on mounting bracket and install securing bolts.
2. Position amplifier/mounting bracket assembly in trunk.
3. Install upper bolts securing amplifier mounting bracket to outer mounting bracket.
4. Install side bolts securing amplifier mounting bracket to outer mounting bracket.
5. Connect amplifier harness multiplugs.
6. Connect CD autochanger data cable.
7. Install trunk RH liner.
8. Connect ground cable to battery terminal and install battery cover. See Battery Reconnection Procedure. See: Starting and
Charging/Battery/Service and Repair
