XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
Front Door Window Motor: Service and Repair
Removal
1. With door open, turn ignition key to position II.
2. Motor door glass to fully lowered position.
3. Turn ignition key to position 0.
4. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and
Repair
5. Remove door casing for access.
6. Remove speaker. See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair
7. Remove main water shedder and position secondary shedder clear of regulator assembly.
8. Remove clips from nylon fixings and retain for re-use.
9. Release glass regulator assembly from nylon fixings.