XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
TOOLS EQUIPMENT AND MATERIALS
The following can be used when proceeding with any of the Workshop Procedures listed in this Technical Bulletin:
^
Dry absorbent clothes
^
Variable water spray gun
^
Flashlight
^
Mirror
^
Compressed air line and gun
^
Wet/dry vacuum cleaner
^
Sealer gun
^
Suitable knife
^
Wedge (plastic or wooden)
^
Hot air blower
^
UV Lamp
^
Sealing compound (tape and plastic compound)
^
Multipurpose adhesive
^
Flange protection material
^
Door sealing sheet (PVC)
^
Double-sided adhesive tape for door sealing sheet
^
Butyl tape for foam gaskets
^
Denatured alcohol (from specialist suppliers)
^
PU Adhesive
^
Silicone remover
^
Tar remover
APPENDIX 2
USE OF THE ULTRA VIOLET (UV) LAMP
Note:
Before using the UV lamp, the safety instructions indicated in the operating instructions must be noted.
1.
From the exterior of the vehicle, wet the affected area using the water spray gun.
2.
From the exterior of the vehicle, spray the prepared test fluid (see UV lamp operation instructions) over the affected area/s.