XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
Front Cross-Member: Service and Repair
Front Suspension
Crossbeam - Front Mounting Bush
Remover/Replacer Adaptor 204-116-05 (JD 143-5)
Special Service Tools
Removal
1. CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices
restrict the number of times a nut or bolt can be used.
Remove crossbeam.
2. Using a hydraulic press, remove front mounting bush from the crossbeam.
Place special tool on the press-bed, with the tool cut-outs upper most.
Position crossbeam on press-bed, with special tool aligned underneath bush.
Align special tool on top of bush.
Operate press to remove bush from crossbeam.
Installation