XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
Taper Separator 211-098 (JD 100)
Special Service Tools
Removal
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict
the number of times a nut or bolt can be used.
CAUTION: Do not attempt to weld or repair the aluminum crossbeam. If it is damaged, a new one must be installed.
1. Position vehicle on a four-post lift.
2. Disconnect battery ground cable.
3. Open engine compartment to service position, and fit paintwork protection covers to fenders.
4. Remove both engine covers (normally aspirated vehicles only).
Release pegs.
Remove covers.