XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1273006.png)
8. Position spacer into the recess of each subframe bush.
9. Locate subframe bushes onto the tapered body locations. Raise jack.
10. Fit suspension subframe mounting-brackets.
Position bracket to subframe.
Fit bush center bolt, DO NOT tighten bolt at this stage.
Fit bolts securing bracket to body, DO NOT tighten bolts at this stage.
Repeat procedure on opposite-side mounting bracket.
