XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1306001.png)
Trim Panel: Service and Repair
Driver Side Underscuttle
Removal
1. Remove battery cover and disconnect earth lead from terminal.
Refer to 'Battery, Battery Cable.' See: Starting and Charging/Battery/Battery Cable/Negative
2. Slacken and remove the two screws securing the lower underscuttle to the fascia panel cross-member.
3. Withdraw the underscuttle upper fasteners from their locations in the fascia panel.
4. Position the underscuttle rearwards for access.
