XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1306003.png)
9. Release the aspirator vent securing tangs and remove the vent from the underscuttle.
10. Remove the underscuttle from the vehicle.
Installation
1. Fit components to underscuttle.
Fit and fully seat air conditioning aspirator vents to underscuttle.
Fit and fully seat aspirator mounting bracket onto vent studs and fit and tighten bracket securing nuts.
Fit stowage compartment lid and fit and tighten securing screws.
2. Fit underscuttle to vehicle.
Position underscuttle below fascia.
Connect valet switch, and air conditioning aspirator harness multiplugs.
Position underscuttle and seat upper fasteners.
Position underscuttle on lower cross-member and fit and tighten the two securing screws.
3. Connect battery earth lead and fit battery cover. Refer to 'Battery, Service and Repair, Battery Reconnection Procedure.' See: Starting and
Charging/Battery/Service and Repair
