XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1307009.png)
5. Remove front seat belt upper anchor plate and trim.
Unclip front seat belt upper anchor plastic cover and position for access to securing nut.
Slacken and remove seat belt upper anchor securing nut.
Remove seat belt upper anchor and plastic cover.
6. Remove front seat belt escutcheon.
On coupe model, slacken and remove securing screw from front seat belt upper escutcheon and remove escutcheon from rear quarter casing.
7. Detach front seat belt lower anchor bar.
Slacken and remove front seat belt lower anchor bar securing bolt.
Remove anchor bar from body grommet and seat belt loop.
Retain anchor bar spacer and card washer.
