XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
1. Align and fit barrel into lock housing.
2. Fit plastic securing ring to barrel and rotate to engage locking tangs.
5. Fit operating arm to barrel.
1. Fit bias spring to operating arm ensuring it is fully seated and tensioned, with ends positioned each side of pillar.
2. Fit operating arm and bias spring assembly to barrel and secure with 'C' clip.
6. Position lock assembly in door handle and fit and tighten securing screw.
7. Fit key and check lock function.
8. Fit driver's door handle.
9. Fit driver's door casing.