XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1316003.png)
11. Remove discs and spacer washers from barrel.
NOTE: If original discs and spacers are to be fitted, record sequence during removal.
Installation
1. Fit and fully seat plastic sealing ring on barrel flange.
2. If original discs are to be fitted, proceed to step 3 noting positions recorded during removal.
3. Identify key cut code.
Hold key so that cut outs can be identified and commencing at key grip, note and record cut out sequence.
