jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Vacuum/Pressure Pump, Seats > < Interior - Poor Seat Heating|Page 6006
Page 1
background image

Seat Heater Switch: Service and Repair

The Center Console Switch Module contains the following switches:

Hazard Warning Switch
Front Fog Lamp Switch
Rear Fog Lamp Switch
Front Seat Heater Switches
Traction Control "OFF" Switch

Removal, Center Console Switch Module 

1. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and

Repair 

2. Remove 'J' gate surround. See: Interior Moulding / Trim/Console/Service and Repair 
3. Remove center console for access. See: Interior Moulding / Trim/Console/Service and Repair 
4. Remove radio console for access. See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair 

5. Disconnect switch module harness multiplug, release module end locators and lightly press module out of console.

 
Installation

1. Fit switch module to console ensuring that end locators are fully seated.
2. Connect switch module harness multiplug.
3. Fit radio console. 
4. Fit center console.
5. Fit 'J' gate surround.
6. Connect ground cable to battery terminal and fit battery cover. See: Starting and Charging/Battery/Service and Repair 

Vacuum/Pressure Pump, Seats > < Interior - Poor Seat Heating|Page 6006