XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-822003.png)
9. Disconnect electrical connector from top of control module.
-
Pull plunger upwards.
-
Release connector.
10. Position an absorbent cloth underneath the HCU to absorb brake fluid spillage.
CAUTION: Remove brake fluid spillage immediately from paint work, with clean water.
11. Release brake outlet tubes from HCU.
-
Undo brake tube union nuts.
-
Install plugs to HCU ports and brake tubes.
