XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-852002.png)
6. Depress and hold down brake pedal at the specified measurement using the special tool.
-
Position tool between brake pedal and seat frame.
-
Turn the tool wheel until the brake pedal is held 60 mm down from its released position.
7. Close bleed nipples on both calipers.
-
Remove bleed tubes and containers.
-
Tighten front bleed nipple to 4 - 6 Nm.
-
Tighten rear bleed nipple to 8 - 11 Nm.
8. Disconnect brake hose from rear caliper housing.
-
Install plugs to caliper and brake hose.
