XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
3. Install brake pads into caliper housing. (See Caution above).
-
Remove paper backing from pads to reveal adhesive shim. Install brake pads, insert clip located on back of inner pad into caliper piston.
4. Install caliper housing to caliper carrier.
-
Align housing to carrier.
-
Install and tighten guide pins to 25 - 30 Nm.
-
Install dust covers.
-
Install anti-rattle spring.
5. Connect brake hose to caliper housing.
-
Remove plugs.
-
Install and tighten bolt to 30 - 40 Nm.