XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-905004.png)
-
Install cable into trunnion.
-
Install spring clip.
3. Connect warning-light switch connector.
4. Install parking-brake lever to body.
-
Position spacers, and washers (if installed).
-
Install bolts: do not tighten bolts at this stage.
-
Tighten pivot bolt to 22-28 Nm.
-
Tighten remaining bolts to 22-28 Nm.
5. Adjust parking brake.
6. Remove stands and lower vehicle.
7. Install trim to hand lever.
8. Install driver seat.
