XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-274003.png)
16. Carefully move the connecting rod and piston assembly towards the cylinder head to disconnect it from the crankshaft. Rotate the crankshaft
slightly if necessary.
17. Remove the bearing shell from the connecting rod and note the grade (colour coded). The crankpin grades are also stamped on the cylinder block.
18. For details of the crankpin and bearing shell grades, refer to Application and ID.
19. Clean all components and mating faces.
20. Install and align the new bearing shell to the connecting rod.
21. Apply new engine oil to the connecting rod bearing and to the crankpin.
