XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-315003.png)
18. Disconnect the oil cooler pipes.
Remove the bolt which secures the oil cooler pipes.
Disconnect the oil cooler pipes from the oil pan body assembly.
Remove and discard the O-ring seals from the pipes and install blanking plugs to the pipes and unions.
19. Remove the oil filter and the oil pressure transmitter.
20. Remove the crankshaft position sensor.
Remove the bolt which secures the crankshaft position sensor to the flywheel housing.
Remove the access grommet from the housing.
Remove the sensor and allow it to hang free under the engine.
Release the harness clips from the oil pan body.
