XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-352008.png)
All vehicles
1. Install the accessory drive belt tensioner.
Tighten to 43 Nm
2. Attach the engine harness to the engine front cover.
3. Install the water pump pulley.
Tighten to 12 Nm.
4. Install the crankshaft pulley. For additional information, refer to Crankshaft Pulley - Vehicles Without: Supercharger
5. Install the left-hand valve cover. For additional information, refer to Valve Cover LH
6. Install the right-hand valve cover. For additional information, refer to Valve Cover RH
7. Reset the hood to the normal position.
8. Connect the battery.
Vehicles without supercharger
1. Carry out the cooling system filling procedure.
