XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
Headlamp Lens: Customer Interest
Lighting - Condensation in Headlamp
417-05
DATE 12/01
Amended 09/02
XK
MODEL
1997-2002 MY XK Range
VIN
001001-A30644
Headlamp Misting - Improve Ventilation - Repair Procedure
Remove and destroy Bulletin 417-05 dated 12/01. Replace with this Bulletin.
Revisions are shown by asterisks and black bars.
Issue:
* Some 1997-2002 MY XK vehicles may experience a build up of condensation in the headlamp assembly. A T-piece vent pipe can be installed to aid
air circulation to reduce condensation in the headlamp.*
Action:
In case of a customer complaint of condensation build-up within the headlight assemblies, install the a T-piece vent pipe, following the procedure below.
MODIFICATION PROCEDURE
1.
Inspect headlamp to see if stub pipe is present (Illustration 1).
Note:
If stub pipe is present, continue with workshop procedure from step 2, if stub pipe is not present, obtain a new headlamp assembly and
continue from step 3.
2.
Remove headlamp assembly (see Workshop Manual) JTIS CD ROM section: 417-01, SRO 86.41.33 or 86.41.36).
3.
Reposition headlamp so the stub pipe to be drilled is facing downward.