XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-198003.png)
2. Inject fluid until it overflows from the plug orifice.
CAUTION: The fluid temperature MUST NOT exceed 50°C.
Wait for the flow of fluid to reduce to a trickle (for at least 1 minute).
11.
Refit the filler / level plug and tighten to the specified torque figure.
12.
Check for leaks and remove spilt fluid.
13.
Shut down and disconnect PDU.REMOVAL AND INSTALLATION
