XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-241033.png)
31. Using new tie strap, secure wheel speed sensor harness to hub carrier.
32. Install handbrake shoes.
33. Install brake disc.
34. Position special tool 204-195 on hub studs and install nuts.
35. Tighten hub nut to 304 - 336 Nm.
36. Remove securing nuts and withdraw special tool 204-195 from hub.
37. Install rear wheel.
