XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-484007.png)
Two eyelet variations are used: a single eyelet and an eyelet pair. The single eyelet has a single "leg" and can be identified by the absence of a suffix.
The eyelet pair has two "legs," identified by the suffix L (left) or R (right).
Where the ground designation differs from LHD to RHD, the RHD ground is shown in parentheses. If the ground designation is the same for LHD and
RHD, only one ground designation is used.
Connector Identification
The following connectors are the common harness-to-harness connectors used throughout the vehicle.
Multilock 040
Low current (used as harness and "direct" connection connector).
