XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-527002.png)
2. Tighten the sensor to specification.
3. Make good the exhaust seals.
Right-Hand
Removal
1. WARNING: ENSURE THAT THE EXHAUST
CATALYST ARE COLD BEFORE COMMENCING WORK
Disconnect the battery ground lead. See: Starting and Charging/Battery/Battery Cable/Negative/Service and Repair
2. NOTE: LH shown, RH access equal
From inside the engine compartment, release the relevant sensor(s) multiplug from its mounting bracket and disconnect the plug.
