XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-532005.png)
22.
Install TPS electrical connector (Illustration 9).
23.
On XK Series vehicles:
^
Install induction elbow to throttle housing.
^
Install and tighten induction elbow to throttle housing securing screws.
On V8 XJ Series vehicles:
^
Reposition main engine harness electrical connector and align with support bracket.
^
Tighten nut securing the engine harness main electrical connector to the support bracket.
^
Install engine compartment rear cover.
^
Install left and right hand bulkhead covers.
24.
On all vehicles.
25.
Connect battery and install battery cover.
26.
Close luggage compartment.
27.
Connect Worldwide Diagnostic System (WDS) to vehicle and clear DTC P0121.
28.
Remove fender protector covers and close hood.
Parts Information
Warranty Information:
Warranty claims should be submitted quoting the information found in the table. This will result in payment of the stated time and, where applicable
