XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-410001.png)
Body Control Module: Service and Repair
Removal
1. Switch ON the ignition. Move the passenger seat fully rearwards. Switch OFF the ignition. Whilst the door(s) is still open and the window down,
disconnect the battery ground cable. See: Starting and Charging/Battery/Battery Cable/Negative/Service and Repair
2. Remove the glove box.
3. Remove the air ducting from the footwell.
4. Disconnect the harness from the module.
