XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-7001.png)
Door Module: Service and Repair
Removal
1. Open the driver's door, or both doors if necessary, to allow the side windows to drop. Ensure that the doors remain open until after the battery has
been disconnected.
2. Disconnect the battery ground cable. See: Starting and Charging/Battery/Battery Cable/Negative/Service and Repair
Remove the battery cover.
3. Remove the trim pad from the door.
4. Remove the door speaker from the door.
Remove the four bolts which secure the speaker.
