XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
A/T Shift Indicator Module: Service and Repair
Selector Indicator Module
Selector Indicator Module
Removal
1. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
2. Disconnect battery ground cable.
Remove the battery cover.
3. Remove the selector lever knob.
4. Remove the J-gate surround.
5. Remove the console finisher veneer panel.
6. Remove the selector indicator module screws.
7. Remove the selector indicator module.