jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

ABOUT US
Power Seat Switch|Service and Repair|Page 258 > < Power Door Lock Actuator Position Sensor|Service and Repair|Page 254

XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)

Page 1
background image

Power Seat Switch: Service and Repair

Removal

1. Power seat to fully raised position.
2. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and

Repair

3. Remove front seat from vehicle and place on clean work surface. See: Body and Frame/Seats/Service and Repair

4. Release seat harness multiplugs from mounting bracket and disconnect multiplugs.

5. Sever and discard tiestraps securing seat harness to seat frame.

Power Seat Switch|Service and Repair|Page 258 > < Power Door Lock Actuator Position Sensor|Service and Repair|Page 254