jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Wheel Speed Sensor > < Seat Heater Switch|Service and Repair
Page 1
background image

Traction Control Switch: Service and Repair

The Center Console Switch Module contains the following switches:

Hazard Warning Switch
Front Fog Lamp Switch
Rear Fog Lamp Switch
Front Seat Heater Switches
Traction Control "OFF" Switch

Removal, Center Console Switch Module 

1. Remove battery cover and disconnect ground cable from battery terminal. See: Starting and Charging/Battery/Battery Cable/Negative/Service and

Repair 

2. Remove 'J' gate surround. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair 
3. Remove centre console for access. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair 
4. Remove radio console for access. See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair 

5. Disconnect switch module harness multiplug, release module end locaters and lightly press module out of console.

 
Installation

1. Fit switch module to console ensuring that end locaters are fully seated.
2. Connect switch module harness multiplug.
3. Fit radio console. 
4. Fit centre console.
5. Fit 'J' gate surround.
6. Connect ground cable to battery terminal and fit battery cover. See: Starting and Charging/Battery/Service and Repair 

Wheel Speed Sensor > < Seat Heater Switch|Service and Repair