XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
2. Fit pinion valve housing to steering rack.
Carefully fit the pinion valve housing to the steering rack using a steady downward twisting motion.
Excessive force and rocking of the housing should be avoided, to prevent damaging the rotary valve O-ring seals.
Remove seal protector tool.
3. Fit and tighten screws.
4. Fit transfer pipes.
Fit new O-ring seals to transfer pipes.
Lightly grease the seals using Texando F020 or equivalent grease.
Remove blanking plugs.
Fit transfer pipes carefully, to avoid distortion.
Ensure that they are fitted fully into the ports.
Tighten union nuts.