XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1047004.png)
6. Fit wishbone to crossbeam.
Align wishbone to crossbeam.
Fit fulcrum bolt; shims and washers to their original positions as noted in the removal section.
Fit and tighten nut.
7. Fit upper ball joint to vertical link.
Engage ball joint taper-pin into vertical link.
Fit and tighten nut.
8. Release vertical link from shock absorber.
9. Secure ABS harness to upper wishbone.
Position harness and secure with tie clips.
10. Fit wheel.
11. Remove stands and lower vehicle.
12. Remove paintwork protection covers.
