XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1050015.png)
30. CAUTION: Note the position of the fulcrum bolts, as some vehicles are fitted with an eccentric bolt to the rear wishbone arm.
Release both lower wishbones from crossbeam.
Remove nut and bolt from front arm of wishbone.
Remove nut and bolt from rear arm of wishbone.
Release wishbone from crossbeam.
Repeat procedure to release opposite-side lower wishbone: collect fulcrum tie.
31. CAUTION: For installation reference, note position of washers and shims before removing fulcrum bolt.
With assistance remove both vertical link and wishbone assemblies from crossbeam.
Remove nut.
Remove fulcrum bolt: collect washers and shims.
Remove vertical link and wishbone assembly.
Repeat procedure to remove opposite-side vertical link and wishbone assembly.
Installation
1. Fit front mounting bushes to crossbeam.
2. CAUTION: Support the hub assembly. Do not allow the weight of the hub assembly to hang on the ball-joints.
