XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1052004.png)
7. Apply 'Alphabond Rapid 101' epoxy adhesive to the shaded area of the bush (as shown), and corresponding area of the bush-housing bore.
8. CAUTION: Bush alignment error must not exceed 5 degrees. Aligning bush with subframe.
Position bush with large single void facing forward.
Align small void centers with masking tape markers.
9. Install bush in housing.
Position a steel plate over the bush, ensuring the plate is large enough to cover the rubber flange.
Operate the press to install the bush.
