XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
6. Release both links from front stabilizer bar.
Use an open-ended spanner on the ball-pin flats to prevent the dust cover from twisting.
Remove nut.
Release link.
Repeat procedure to release opposite-side link.
7. Remove stabilizer bar mounting-brackets and bushes.
Remove bolts.
Remove bracket.
Remove bush.
Repeat procedure to remove opposite-side mounting-bracket and bush.
8. Clean relevant parts.
Installation
1. NOTE: To ease fitting, apply a suitable lubricant to bush.
NOTE: Make sure bushes are seated correctly in the stabilizer bar's retaining bosses and crossbeam recesses.
Fit both mounting bushes to stabilizer bar.