XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1077031.png)
8. CAUTION: Do not stretch brake-hose when fitting shock absorber and spring assembly.
With assistance, fit shock absorber and spring assembly.
Position shock absorber to lower mounting.
Fit bolt to lower mounting, DO NOT fit nut at this stage.
9. Fit upper wishbone.
Position wishbone to crossbeam.
Fit fulcrum shaft; washers and shims in the positions noted in removal.
Fit and tighten nut.
10. Fit shock absorber and spring assembly upper-mounting to body.
Raise suspension carefully on jack, and guide upper mounting studs into body stud-holes.
Fit and tighten nuts.
Vehicles fitted with adaptive damping: connect connector.
Fit covers.
