XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1100014.png)
Remove two bolts and two screws securing back plate to hub carrier.
Withdraw back plate complete with parking brake cable.
23. Remove nut and washer from pivot pin.
24. Remove hub and carrier from wishbone and axle shaft.
Withdraw pivot pin and remove hub and carrier assembly.
25. CAUTION: Note position of shims during removal. They must be returned to their original positions during installation.
Noting positions, remove shim from each end of pivot pin sleeve.
