XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-1100016.png)
29. Withdraw ABS rotor from hub carrier.
30. Remove outer seal and bearing assembly from hub carrier. Using a drift, remove and discard outer seal. Remove outer bearing. Remove bearing
spacer. Remove bearing shim.
31. Remove inner seal and bearing from hub carrier. Using a drift, remove and discard inner seal. Remove inner bearing.
32. Using approved cleaning agents: Wash and thoroughly dry inner and outer bearings.
Thoroughly clean hub carrier paying particular attention to bearing cups.
Thoroughly clean hub.
Installation
1. Grease bearings. Pack inner and outer bearing races with Shell Retinax 'A' grease: Apply a film of shell Retinax 'A' grease to bearing cups
