jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Pressure Regulating Solenoid, A/T|Service and Repair|Page 3015 > < Engine Controls - Hard Start/No Start Condition|Page 3008
Page 1
background image

Pressure Regulating Solenoid: Service and Repair

Pressure Regulator Valve

Removal

1. Open the drivers door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been

disconnected.

2. Disconnect battery ground cable.

Remove the battery cover.

3. WARNING:  TRANSMISSION FLUID MAY CAUSE SEVERE BURNS, ENSURE THAT ALL SAFETY PROCEDURES ARE

OBSERVED.

Raise the vehicle on a suitable lift.
Carefully remove the drain plug and drain the transmission fluid.

4. Remove the twenty-two fixings which secure the fluid pan .

Remove the fluid pan and all traces of gasket material.

Pressure Regulating Solenoid, A/T|Service and Repair|Page 3015 > < Engine Controls - Hard Start/No Start Condition|Page 3008