XK-8 Coupe (X100) V8-4.0L (AJ27) (1999)
/v8-4.0l_(aj27)/Page-707001.png)
Transmission Position Switch/Sensor: Service and Repair
Transmission Rotary Switch
Removal
1. Open the driver's door, or both doors if necessary, to allow the side glass to drop. Ensure that the doors remain open until after the battery has been
disconnected.
2. Disconnect battery ground cable.
Remove the battery cover.
3. From above, disconnect the rotary switch harness multiplug.
4. From below, release the harness from the retaining clips.
